5000 Series Pure Aluminum Plate/Coil/Bar/Pipe

Al metal alloy: 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000 series etc

Alu temper: O - H112, T3 - T8, T351 - T851 etc

Width: 200mm - 2650mm

Thickness: 0.2mm - 8mm

Technology:  hot rolled ( DC ), cold rolling ( CC ), cast

Standard: ASTM B209, GB/T 3880, EN AW etc

5000 Series Alloy Aluminum Product Overview:

5000 series alloy aluminum coil represents 5052, 5005, 5083, 5A05 series. 5000 series aluminum coil belongs to the more commonly used alloy aluminum sheet series. The main element is magnesium, the magnesium content is between 3-5%. It can also be called an aluminum-magnesium alloy. The main characteristics are low density, high tensile strength, and high elongation. In the same area, the weight of aluminum and magnesium alloy is lower than in other series. Therefore, it is often used in aviation, such as aircraft fuel tanks. In the conventional industry, it is also widely used. The processing process is continuous casting and rolling, which belongs to the hot-rolled aluminum coil series, so it can do oxidation deep processing.

Chemical Composition Of 5052 Aluminum Coil

Si ( Silicon ): ≤ 0.25

Cu ( Copper ): ≤ 0.05

Mg ( Magnesium ): ≤ 0.03

Zn ( Zinc ): ≤ 0.05

Mn ( Manganese ): ≤ 0.03

Cr ( Chromium ): /

Fe ( Iron ): ≤ 0.35

Ti ( Titanium ):≤ 0.03

Others total: ≤ 0.15

Al ( Aluminum ): remainder

5052 Aluminum Coil Properties

5052 Aluminium coil is alloyed with 2.5% magnesium. Tensile strength range is 31 to 44 KSI. 5052 has excellent workability, weldability and corrosion resisitance.

Medium tenacity

Good corrosion resistance

Lower density

High tensile strength

High elongation